Short range low power wireless devices and Internet of Things (IoT)


Power and IoT

The Internet of Things can now be considered a mature technology. With active devices hitting 9.5 Billion in 2019, IoT has certainly entered its golden age. Even so, IoT is still faced with numerous challenges one of them being battery life of IoT devices. Many IoT devices are powered by batteries that need to be replaced or recharged quite often. This hampers the devices’ convenience and flexibility while diminishing their appeal as well. Low power wireless devices come in handy in mitigating these challenges.

Low power wireless devices

Low power wireless devices incorporate technologies that enable them to consume lesser power without affecting their efficiency. This way they can gather and send data as required while consuming lesser power compared to other wireless devices. These technologies include;

  6LowPAN

IPv6 low power wireless Personal Area Network is based on inter protocol version 6 (IPV 6) technology. It can work with a wide range of frequency bands and physical layers thus are quite versatile. 6LowPAN can also be used to communicate with multiple communication platforms like sub-1Ghz RF, Wi-Fi 802.15.4 wireless communication platforms, and Ethernet.
6LowPAN bases its working principle on the ability to deliver small IPv6 information packets to other networks through a low powered Wi-Fi network. It has self-healing abilities and is robust.

Bluetooth Low Energy

Bluetooth Low Energy (BLE) is an ultra-low power consumption wireless technology. It features microamp average current in target applications. Its key features include;
·         Lightweight protocol stack
·         A raw data rate of 1 Mbps
·         10M range
·         Immunity from 2.4 GHz radio sources

Z-Wave

Z-Wave is a low powered RF communication technology. It is suitable for small network applications for instance smart homes. Its working principle is based on delivering small data packets in a low-latency communication approach through a low powered wireless network. Z-wave can also work well with sub 1GHz RF frequency while filtering out interference from other Wi-Fi or similar technologies. Its optimal working frequency is 900 MHz It has a range of 30 meters and transfer speeds of 9.6-100 kbps.

RF energy harvesting

This is the process of harvesting RF from broadcasting networks like TV networks, public Wi-Fi, digital cable, and cellular network. The energy harvested can be used to charge the on-board battery thus extending their lifespan.

Applications

Low Power Wireless Devices can be used in various application including;
·         Consumer electronics
·         Healthcare
·         Smart cities
·         Smart homes


Benefits of Low Power Devices in IoT

Cost reduction

IoT requires a high starting capital hence there is a need to reduce operational costs associated with it to make IoT appealing. Low power devices offer exactly that. By reducing power consumed, the frequency of battery change reduces significantly.

Maintenance

Since the batteries last a lot longer, then the need to attend to these devices with regards to battery replacement is reduced. Self-healing networks, also reduce the need to constantly reboot thus reducing the need for constant attendance to these devices.

Summary

Low powered devices are a big boost to IoT. They improve the flexibility of IoT solutions while reducing the costs associated with them. They increase the appeal of IoT thus accelerating its absorption. They keep evolving every day making the future of IoT even more appealing.


Source URL:http://blog.enrgtech.co.uk/





Comments

Post a Comment

Popular posts from this blog

Little Know more about Brush-less Motors

Image
Brushless motors Brushless differs from conventional dc motors in the sense that it does not have brushes. Commutation is done using electronic drives to feed power to the stator windings. They consist of a rotor which is in the form of a permanent magnet and a stator that is in the form of polyphase armature windings. A  brushless DC motor  can be constructed in two ways; one is by placing the rotor outside the core and the other is by placing the rotor inside the core. How a brushless motor works Brushless motors are driven by electronic drives that  switch  the supply voltage between the stator windings while the rotor turns. There is a transducer that monitors the position of the rotor as it turns and conveys the information to an electronic controller. The controller then decides which stator winding to be energized based on the position of the rotor. Electronic drives are made up of two transistors each phase which is run by a microprocessor. T...
Read more

LED Modules: Manufacturer,Types and Application

Image
LED Modules Light-emitting diodes (LED) modules are LED self-contained devices that are designed to either function on its own or to plug into a compatible unit. These modules are mostly used in the development of both energy-efficient and portable lighting.  An LED contains several LED bulbs that are connected to a fixture that contains a battery or an alternative power supply which powers all the bulbs contained therein. LED modules can either emit white light or emit different colours based on the material they are made of. They are prominently used for advertising and signages but could as well be used for other purposes due to their versatility. Types of LED modules There are a variety of LED modules available in the market. There no specific parameters that can be used to categorize LED modules . They can be categorized in terms of efficiency, form, CCT, colour among others. Some of the common ones used in signage and advertising include; Side LED mod...
Read more

Block-chain: A Complete Beginners Guide | Block Chain Technology

Image
Blockchain technology Blockchain technology is barely three decades old, but it has completely changed global money transfer as we know it. It was first conceived in 1991 by a group of researchers who originally intended it to be used to timestamp digital documents to make it impossible to tamper with them. This concept was first put into actual use in 2009 by Satoshi Takamoto to create Bitcoin. Bitcoin has since spurred the adoption of  blockchain technology  for cryptocurrency, medical records, and land records among others.  What is blockchain? A blockchain is a network of computers that share a digital ledger that is duplicated and distributed across all participants in the network (nodes). That is to say that each node on the network has a duplicate copy of the ledger. The digital ledger keeps a chain of transactions since the creation of the network. The chain of transactions keeps growing as new blocks of transactions are approved and then added along....
Read more