Bluetooth 5 Mesh Networking to Advance IoT


Bluetooth 5: Going faster and further

When Bluetooth Special Group (SIG) released Bluetooth 5 last year, it was clear that their intentions were to improve the distance covered, speed and throughput of Bluetooth Low Energy. True to this intention, Bluetooth 5 came bearing superior performance compared to its predecessor the, Bluetooth 4.2.

Range

Bluetooth 5 offers a theoretical range of about 200m. This is four times offered by its immediate predecessor Bluetooth 4.2. To spice it up, it offers users the chance to select data rates. The higher the data rate, the lower the range achieved.

Speed

Bluetooth 5 added a new interface to double the bandwidth at the expense of power. The new Physical Layer (PHY) supports up to 2Mbps and transmission power of +20dB in low energy mode. As discussed earlier, Bluetooth 5 offers you the opportunity to choose from various transmission speeds ranging from 2Mbps,1Mbps, 500kps and 125 kbps. The lower the data rate, the better the range.

Throughput

The packet data format from Bluetooth 4.2 to Bluetooth 5 is similar, the payload is 251 octets. The throughput of Bluetooth 5 at 1Mb/s is therefore similar to that of Bluetooth 4.2 (0.803 Mb/s). However, at 2Mb/s the throughput is 1.4Mb/s.

Mesh Networking

A mesh network is a network that relies on wireless nodes to create a virtual wireless network. In a mesh network, the devices are wirelessly connected without involving ISPs or phone companies. Every node establishes network links with surrounding nodes so as to enable traffic to hop between nodes on numerous paths across the network. Based on this principle, the mesh networks are self-organizing, self-healing and highly scalable. Mesh network also increases the area that can be covered by the network.
Unfortunately, Bluetooth did not support mesh networking initially. This was a severe drawback as IoT was rapidly gaining popularity. It took the intervention of Cambridge Silicon Radio (CSR) to create ways to enable Bluetooth Low Energy (BLE) devices to form a mesh network. Despite CSR’s efforts, mesh networking had not been included in the Bluetooth standard. Now mesh networking has been standardized in Bluetooth 5. This factor makes Bluetooth 5 a major content for any IoT application. What makes it even more appealing, Bluetooth has been incorporated in in every smartphone, laptop, and tablet. This makes its configuration both easy and cheap.

The ability to coexist

On top of all the benefits discussed above, Bluetooth 5 is able to coexist with other services in the 2.4 GHz band. To ensure that there is little interference between it and other wireless technologies, SIG incorporated avoiding channels used by the Wi-Fi and added availability masks capable of detecting and preventing interference mostly with cellular networks. With cellular networks continually expanding their cellular networks, this will come in handy in ensuring that the standard continues to coexist with cellular networks even in future.

Conclusion

The features of Bluetooth 5 discussed here are only the key features. There are a couple more adjustments to it that make it a formidable competitor for its application. Mesh networking makes Bluetooth more than the short-range personal area network we have always known. Mesh networking coupled with Bluetooth 5 goes a long way in ensuring that Bluetooth remains competitive as a preferred connectivity solution for several years to come.
Source : https://goo.gl/HjWwSZ

Comments

Post a Comment

Popular posts from this blog

Little Know more about Brush-less Motors

Image
Brushless motors Brushless differs from conventional dc motors in the sense that it does not have brushes. Commutation is done using electronic drives to feed power to the stator windings. They consist of a rotor which is in the form of a permanent magnet and a stator that is in the form of polyphase armature windings. A  brushless DC motor  can be constructed in two ways; one is by placing the rotor outside the core and the other is by placing the rotor inside the core. How a brushless motor works Brushless motors are driven by electronic drives that  switch  the supply voltage between the stator windings while the rotor turns. There is a transducer that monitors the position of the rotor as it turns and conveys the information to an electronic controller. The controller then decides which stator winding to be energized based on the position of the rotor. Electronic drives are made up of two transistors each phase which is run by a microprocessor. T...
Read more

LED Modules: Manufacturer,Types and Application

Image
LED Modules Light-emitting diodes (LED) modules are LED self-contained devices that are designed to either function on its own or to plug into a compatible unit. These modules are mostly used in the development of both energy-efficient and portable lighting.  An LED contains several LED bulbs that are connected to a fixture that contains a battery or an alternative power supply which powers all the bulbs contained therein. LED modules can either emit white light or emit different colours based on the material they are made of. They are prominently used for advertising and signages but could as well be used for other purposes due to their versatility. Types of LED modules There are a variety of LED modules available in the market. There no specific parameters that can be used to categorize LED modules . They can be categorized in terms of efficiency, form, CCT, colour among others. Some of the common ones used in signage and advertising include; Side LED mod...
Read more

Block-chain: A Complete Beginners Guide | Block Chain Technology

Image
Blockchain technology Blockchain technology is barely three decades old, but it has completely changed global money transfer as we know it. It was first conceived in 1991 by a group of researchers who originally intended it to be used to timestamp digital documents to make it impossible to tamper with them. This concept was first put into actual use in 2009 by Satoshi Takamoto to create Bitcoin. Bitcoin has since spurred the adoption of  blockchain technology  for cryptocurrency, medical records, and land records among others.  What is blockchain? A blockchain is a network of computers that share a digital ledger that is duplicated and distributed across all participants in the network (nodes). That is to say that each node on the network has a duplicate copy of the ledger. The digital ledger keeps a chain of transactions since the creation of the network. The chain of transactions keeps growing as new blocks of transactions are approved and then added along....
Read more