Multi-Standard Ultra-Low-Power Wireless Mcus For The IoT

 

 

The Internet of Things (IOT)

Low-power wireless Internet of Things (IoT) technologies are showing up all over the world, from household to shops and industries and towns together with other technologies such as fitness and health, linking all saving, downloading and exchanging information via the cloud. Interconnection appears to be in its way to being one of those fundamental rights. Personalized reasonably high-speed access from mobile wireless technologies gave consumers the superiority complex to connectivity. It is no longer a restrained privilege for the few. Rather, it is a necessity that the masses demand. As we go about our daily tasks, information is collected from us. But there is so much more that can be detected, and the growth in involvement in large-scale wireless sensor nodes linked to online network and rear-end servers is attracting many implementations to adopt IoT communication for their particular needs.
The wireless MCU aims low-energy Wireless models with a focus on low-energy wall wart battery life. Multi-protocol wireless MCUs like this really provide fast ways to identify and build communication systems over the 2,4-GHz ISM band with ZigBee, RF4CE, 6LoWPAN and Bluetooth Smart. The wireless MCUs share a similar design on one chip with an optimized RF transceiver and ARM Cortex-M3 MCU to operate the networking stack and tailored apps without losing battery life. Wireless technologies need a gateway or a tablet or smartphone to link to the cloud in the cases of Bluetooth Smart. Wi-Fi, however, links directly to the Internet, making it a crucial IoT implementation standard. Wi-Fi-targeted systems, such as the SimpleLink network processor and Wi-Fi mobile MCU, offer communication of 802.11 b / g / n. The networking processor can be an extension to an existing MCU and works to relieve the host processor rather autonomously.

Features of CC2650 MCU

Microcontroller

  • Strong ARM ® Cortex ® -M3 
  • EEMBC CoreMark ® Score: 142 
  • Up to 48-MHz Clock Speed 
  • 128 KB SRAM In-System Programmable Flash
  • 8 KB Cache 
  • 20 KB Ultralow-Leakage SRAM 
  • 2-Pin cJTAG and JTAG Debugging 
  • Over – The-Air Update Support (OTA)

Peripherals

  • All Digital Peripheral Pins Can Be Routed to Any GPIO
  • Four General-Purpose Timer Modules (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
  • 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
  • Continuous Time Comparator
  • Ultralow-Power Analog Comparator
  • Programmable Current Source
  • Real-Time Clock (RTC)
  • AES-128 Security Module
  • True Random Number Generator (TRNG)
  • 10, 15, or 31 GPIOs, Depending on Package Option
  • Support for Eight Capacitive-Sensing Buttons
  • Integrated Temperature Sensor
  • UART
  • 2× SSI (SPI, MICROWIRE, TI)
  • I2C
  • I2S

External system

  • On-Chip internal DC-DC Converter
  • Very Few External Components
  • Seamless Integration with the SimpleLink™ CC2590 and CC2592 Range Extenders

 Low power

  • Wide Supply Voltage Range
  • Normal Operation: 1.8 to 3.8 V
  • External Regulator Mode: 1.7 to 1.95 V
This sensor controller is suitable for syncing external sensors and automated data collection while the rest of the system is in sleep mode. The CC2650 system is therefore suitable for applications across a wide variety of products like automotive, consumer products, and medical applications.
Location: United Kingdom

Comments

Post a Comment

Popular posts from this blog

Little Know more about Brush-less Motors

Image
Brushless motors Brushless differs from conventional dc motors in the sense that it does not have brushes. Commutation is done using electronic drives to feed power to the stator windings. They consist of a rotor which is in the form of a permanent magnet and a stator that is in the form of polyphase armature windings. A  brushless DC motor  can be constructed in two ways; one is by placing the rotor outside the core and the other is by placing the rotor inside the core. How a brushless motor works Brushless motors are driven by electronic drives that  switch  the supply voltage between the stator windings while the rotor turns. There is a transducer that monitors the position of the rotor as it turns and conveys the information to an electronic controller. The controller then decides which stator winding to be energized based on the position of the rotor. Electronic drives are made up of two transistors each phase which is run by a microprocessor. T...
Read more

LED Modules: Manufacturer,Types and Application

Image
LED Modules Light-emitting diodes (LED) modules are LED self-contained devices that are designed to either function on its own or to plug into a compatible unit. These modules are mostly used in the development of both energy-efficient and portable lighting.  An LED contains several LED bulbs that are connected to a fixture that contains a battery or an alternative power supply which powers all the bulbs contained therein. LED modules can either emit white light or emit different colours based on the material they are made of. They are prominently used for advertising and signages but could as well be used for other purposes due to their versatility. Types of LED modules There are a variety of LED modules available in the market. There no specific parameters that can be used to categorize LED modules . They can be categorized in terms of efficiency, form, CCT, colour among others. Some of the common ones used in signage and advertising include; Side LED mod...
Read more

Block-chain: A Complete Beginners Guide | Block Chain Technology

Image
Blockchain technology Blockchain technology is barely three decades old, but it has completely changed global money transfer as we know it. It was first conceived in 1991 by a group of researchers who originally intended it to be used to timestamp digital documents to make it impossible to tamper with them. This concept was first put into actual use in 2009 by Satoshi Takamoto to create Bitcoin. Bitcoin has since spurred the adoption of  blockchain technology  for cryptocurrency, medical records, and land records among others.  What is blockchain? A blockchain is a network of computers that share a digital ledger that is duplicated and distributed across all participants in the network (nodes). That is to say that each node on the network has a duplicate copy of the ledger. The digital ledger keeps a chain of transactions since the creation of the network. The chain of transactions keeps growing as new blocks of transactions are approved and then added along....
Read more