How to Setup the Arduino MKR 1300

MKR 1300

The Arduino MKR 1300 comes equipped with the ATMEL SAMD21 bridged with a LoRa module thus allowing for remote IoT applications for instance mining, off-shore rigs, and farms. It has been designed to integrate SAMD21’s low power consumption and high performance while maintaining Arduino’s ease of use.

Setting up the MKR 1300

Step1: Arduino IDE

Download the latest Arduino IDE from their official website.

Step 2: Installing Arduino IDE in the board

Start the IDE. Give a couple of minutes for it to open up. Click on Tools, then select Board and then click on Boards Manager. Enter ‘MKR’ on the board manager’s search bar. From the results, select the result “Arduino SAMD Boards” and then click install. This process takes some time so be patient.

You could also enter ‘Zero’ into Boards Manager’s search bar, among the results will be “Arduino SAMD Boards” which contains the Arduino MKR 1300. Click on the “Install” button and the board information will be automatically added to the IDE.
During installation, you may be prompted about the drivers, in this case, install them because if you don’t, the board may not be recognized by the computer.

Step 3: Test the board

To test if the board is working, load the blink example built into the Arduino IDE. The beauty with Arduino IDE is that the code written for one board on the IDE is likely to work on all the other boards. This makes it easy to migrate from one board to another. Go to File> Examples>0.1Basics> Blink. If the board is well installed and the connections are right, the Arduino MKR should blink. This marks the final stage of the setup process.

Comments

Post a Comment

Popular posts from this blog

Little Know more about Brush-less Motors

Image
Brushless motors Brushless differs from conventional dc motors in the sense that it does not have brushes. Commutation is done using electronic drives to feed power to the stator windings. They consist of a rotor which is in the form of a permanent magnet and a stator that is in the form of polyphase armature windings. A  brushless DC motor  can be constructed in two ways; one is by placing the rotor outside the core and the other is by placing the rotor inside the core. How a brushless motor works Brushless motors are driven by electronic drives that  switch  the supply voltage between the stator windings while the rotor turns. There is a transducer that monitors the position of the rotor as it turns and conveys the information to an electronic controller. The controller then decides which stator winding to be energized based on the position of the rotor. Electronic drives are made up of two transistors each phase which is run by a microprocessor. The magnetic field i
Read more

LED Modules: Manufacturer,Types and Application

Image
LED Modules Light-emitting diodes (LED) modules are LED self-contained devices that are designed to either function on its own or to plug into a compatible unit. These modules are mostly used in the development of both energy-efficient and portable lighting.  An LED contains several LED bulbs that are connected to a fixture that contains a battery or an alternative power supply which powers all the bulbs contained therein. LED modules can either emit white light or emit different colours based on the material they are made of. They are prominently used for advertising and signages but could as well be used for other purposes due to their versatility. Types of LED modules There are a variety of LED modules available in the market. There no specific parameters that can be used to categorize LED modules . They can be categorized in terms of efficiency, form, CCT, colour among others. Some of the common ones used in signage and advertising include; Side LED modules
Read more

Block-chain: A Complete Beginners Guide | Block Chain Technology

Image
Blockchain technology Blockchain technology is barely three decades old, but it has completely changed global money transfer as we know it. It was first conceived in 1991 by a group of researchers who originally intended it to be used to timestamp digital documents to make it impossible to tamper with them. This concept was first put into actual use in 2009 by Satoshi Takamoto to create Bitcoin. Bitcoin has since spurred the adoption of  blockchain technology  for cryptocurrency, medical records, and land records among others.  What is blockchain? A blockchain is a network of computers that share a digital ledger that is duplicated and distributed across all participants in the network (nodes). That is to say that each node on the network has a duplicate copy of the ledger. The digital ledger keeps a chain of transactions since the creation of the network. The chain of transactions keeps growing as new blocks of transactions are approved and then added along. Before a new
Read more